Request An Estimate

 

 

What are your thoughts on How to Troubleshoot and Repair an Electric Water Heater?

Lots of contemporary houses utilize an electric water heater for their furnace, as a result of its ease as well as simplicity of use. However, similar to any other electric home appliances, issues may arise with its use, all of a sudden. It can be truly discouraging to get up to a cold shower instead of a warm one or having your bathroom with water that isn't hot enough or even also warm. Whatever the situation may be, hot water heater troubles can be rather nerve-racking. Fortunately, we have actually made a listing of possible services to your water heater concerns. There are a number of elements that can create a number of these problems, maybe a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you turn off the major power supply for security. Whatever the problem is, getting it dealt with must not position too much of a concern if you follow these actions:

 

Call An Expert:

If after replacing all damaged parts and resetting your temperature level, the hot water heater still isn't functioning, you may require to call a professional plumber for a professional point of view. The issue with your heater could be that the hot and cold faucets have been switched or it might be undersized for the amount of warm water needed in your house. Whatever the situation might be, an expert plumber would certainly assist solve the issue.

 

Check Your Power Supply:

As fundamental as this may appear, it is very needed. Without adequate power, your hot water heater will not work. So the first thing to do when your water suddenly stops working is to validate that it isn't a power issue. Examine if the fuse is blown out or the breaker tripped. If the breaker is the concern, just transform it off and on once again. Replace any type of busted or damaged fuse. Evaluate the device with power after these changes to see if it's currently functioning.

 

Inspect Your Thermostat:

If your hot water heater still isn't functioning or the water coming out isn't warm sufficient, you may require to check the temperature setups on your top thermostat. Guarantee the breaker is turned off before doing anything. Open up the accessibility panel and also press the red button for temperature reset over the thermostat. This need to help heat up the water. Transform the circuit breaker back on and inspect if the trouble has been fixed.

 

Examine the Heating Element in the Water Heater:

If it's not a power issue, after that try having a look at your burner if it is still functioning. Test each of your heating elements to ensure the trouble isn't with any of them. If any of them is malfunctioning, change that component and then check whether the hot water is back on.

 

Final thought

Hot water heater troubles are not always major. A number of them are because of small concerns like a blown fuse or worn-out heating element. Replacing the defective parts ought to work. Nonetheless, if you are still incapable to address the problem, give a call to your closest plumber to find to get it taken care of.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

As an avid person who reads on How to Troubleshoot and Repair an Electric Water Heater, I figured sharing that post was a smart idea. I beg you take the opportunity to share this blog posting if you liked it. Bless you for your time. Kindly come visit our blog back soon.

Get A Free Estimate